Choose a machine, pad and polish combination, then test your way toward the least aggressive effective process.
Before you begin
Machine polishing removes a small amount of material, so inspection comes first. Clean and decontaminate the paint, measure it where possible and identify repainted or unusually thin areas.
The right approach
A dual-action machine is approachable because its oscillating motion spreads heat and abrasion. Start with a moderate pad and polish on a small test section, then inspect under a high-quality light.
REJDI TIPConsistency beats force. Use clean tools, controlled product amounts and enough light to see what the surface is telling you.
Final checks
Increase aggressiveness only when the test section shows it is necessary. Clean pads frequently, protect edges and finish by removing polishing oils before applying the chosen protection.
Quick checklist
- Work on a cool, stable surface
- Keep clean and used tools separate
- Test first when material compatibility is uncertain
- Read the manufacturer label before use
